|
|
Build Your Online Product Catalogs?
Three workstages wood CNC router for door
CC-MS1325AS-3
Features:
Asynchronous multi-head woodworking CNC Machine is customized for changing the
tools within 2-4 piece. It's not only economic, also can realize speedy auto tool change,
save the time of manual tool change, improve the working speed and precision
Main Special Configuration:
1. For this model Woodworking cnc machine, using three 4.5KW Air-cooling spindle, the middle spindle can have two piece tools mainly for board's side drilling and milling. So, it also called multi-function cnc router machine.
2. Three spindles can use three different tools for your three different designs' processing at the same time, which is similar with Auto-tool changer CNC Machine Center with three tools.
3. Taiwan Syntec Control System, with vernier Handle controller
4. Special Vacuum System with: vacuum table with movable suction block, vacuum pump and tubes
5. Higher gantry can be up to 300mm; Bigger gantry width can make sure every spindle's effective working area.
6. Heavy bistratal Side plates, which can keep large supporting power for the cnc router gantry's moving perfectly.
7. This CNC Machine XYZ effective working area is 1300*2500*300mm.
8. Independently Electric Control Box, with perfect wiring and free moving pulleys.
10. Heavy Hard Steel Lath Body, dealing with Time-treatment, never to be deformed. keep the cnc router machine working High stability.
11. High-precision and bigger ball screw. Original Bigger Taiwan HIWIN Straight Square Guide Rail. To make sure the machine's working high-speed and high-efficiency.
12. The table is also with locating rods, in order to fix the working piece easily.
13. Provide protective barrier for the cnc machinery, in order to keep the safe operation.
14. Can work on the big wide board , also long and narrow board at the same time
15. Chencan CNC router can promise that our any set machine is the best quality and high-speed Wood carving and cutting CNC Router.
Technical Parameter
Des |
| Company: |
Shandong Chencan Machinery Co.,Ltd
|
| Contact: |
Mr. sackol chen |
| Address: |
Mingjia WestRoad Qihe Economic Development Zone |
| Postcode: |
250000 |
| Tel: |
086-0531-88078568 |
| Fax: |
086-0531-88078968 |
| E-mail: |
|
|
|
|
Home
